Barrel Vise Jaws for Rifle and Pistol
(Pricing as of September 20, 2017, 10:23 am)
Our barrel vise jaws is a 2 piece set and works great for both rifle and pistol barrels. These are made from non-anodized dead soft 6061 aluminum billet so that you will get a better grip on the barrel and not mar the finish. These are made to fit just about any diameter barrel. They drop into your vise for clamping, are very easy to use, and grip the barrel so you can install muzzle brakes, clean the bore and chamber, or perform other maintenance. This is a must-have for the firearm enthusiast or “Do-it-Yourself-er” They will also work on slightly tapered barrels, such as the Ruger 10/22 (the chamber area on most rifles is not tapered) Features and Benefits; Made from 6061 ‘dead soft” aluminum billet. These are not “V” blocks, they are “U” blocks. They are machined for a 3/4″ / 19mm diameter barrel. A smaller barrel will be gripped on “flats” of the larger radius. A larger barrel will be gripped by the edges of the radii. Just clamp down with your vise and the barrel won’t spin. Forget those welded, screw together clamps; use these instead. You can clamp the action on the flats and the barrel in the groove. No wood blocks or split bushings, spacer, or sleeves here. Get the full clamping power from a vise. Lifetime guarantee. Designed, developed, and manufactured in the USA.